Design is for 4 Storey family residence 3500 Sq. Ft.
Please read solution specification below and then look at solution components (links to products) at the bottom to get a complete view of
your solution. Please send us email with questions/comments you might have.
To place the order, Keep this page open and click on each item and add it to the shopping cart on the other window that pop's up. Make the quantity and color choices recommended. Once an item is added come back to this page and click on next item.
Keep adding items to cart and go to checkout and fillout first page to get a price quote including shipping charges.
Solution Specification:
Four types of outlets for audio video data telephone (whole house described seperately)
VDT : Video, Data, Telephone, powered by composite cable
DT : Data + telephone powered by cat5e cables
HT : Home theater 5 pairs of binding post modules for audio input. Located behind entertainment/TV unit. (Other end terminates directly on to the speakers.
VC : video camera, run one RG6 and 1 cat5e to each of the interior/exterior camera location. Three technologies available, CCTV($), IP camera($$), IP camera with Power over ethernet($$$) wire for both.
CCTV uses 1 RG6 for video and cat5e for 12V DC
IP camera uses cat5e for signal and control and have a 110 V AC close by for power.
IP camera with power over ethernet handles signal/control and power all from one cat5e but is very expensive now.
When pre-wiring for video camera leave ample extra length on camera end and cover gang box with wallplate.
Five Rooms (5)
5 x 1 VDT on wall across from bed
5 x 2 DT on each side of bed
1 x 1 HT for master bedroom recommended (I would recommend it)
Kitchen (1)
1 x 1 VDT under cabinet to allow tel, data and under cabinet
TV.
1 x 2 DT one on kitchen island, another near/behind fridge
family and living rooms (2)
2 x 1 VDT behind big screen TV/Flat Panel TV
2 x 1 DT on another wall
1 x 1 HT in Family room
note: if installing flat panel, install wallplate
(and 110V outlet) at approx 5 feet height.
Basement and Garage (2)
2 x 1 DT on for future devices in Laundry room/garage/backyard
Whole House audio (2)
none.
Wired Survelliance Camera
Run one cat5e and one RG6 to two locations where
you might want a camera eg. Foyer, overlooking backyard
etc. The two cables will allow you to run either CCTV or
IP cameras
Total outlets(wallplates) of each type
VDT=8
DT=16
VC=2
HT=2
Total outlets by service type
Video 8
Data 8 + 16 = 24
Telephone 8 + 16 = 24
VC 4
Surround sound 5.1/Home Theater 2
Solution Components:
Structured Wiring Panel
These panels(cabinets) are designed to fit between studs (2x4inch wooden colums) and mount flush with the wall. Unit comes as a can and a cover. the can mounts flush with the finished wall. The cover rides
on the wall and screws into the can and will rise 1/4 inch from the wall.
AC power supply