Thomas & Betts introduces Snap-N-Seal® One Piece Compression
Connectors, the newest addition to the Snap-N-Seal® system. With
its user-friendly, pre-positioned and detachably coupled plastic
sleeve, the Snap-N-Seal® One Piece Connector incorporates
time-proven advantages for a reliable connection. Snap-N-Seal®
One Piece Connectors use the same proven 360° compression
design and installation tools as other LRC® Snap-N-Seal® products.
DESIGN FEATURES
To reduce assembly time and simplify installation, the plastic sleeve is pre-positioned and detachably coupled to the connector body.
The plastic sleeve’s separability from the connector body further simplifies difficult installations.
True 360° compression onto cable ensures superior RF
shielding performance, -95 dB effective shielding (typical on 60% bonded foil cable).
Permanently stamped part numbers and color-coded sleeves for easy identification before and after installation.
Installation requires one-step 1/4” - 1/4” cable preparation and standard compression tools used for all 59 & 6 series Snap-N-Seal® product families.
Quad-sealed system prevents moisture migration.
Incorporates an iridescent chromate finish plus UV resistant plastic and O-rings to provide a reliable, environmentally sealed
product.
Superb return loss performance of -30 dB to 1GHz.
Cable retention exceeds 40 lb. minimum as specified by the SCTE.
TECHNICAL SPECIFICATION
PHYSICAL PROPERTIES
NUT, POST AND COLLAR: BRASS
NUT AND COLLAR FINISH: CADMIUM PLATED WITH IRIDESCENT CHROMATE COATING
POST FINISH: TIN PLATED
O-RING: ETHYLENE PROPYLENE
ELECTRICAL PROPERTIES
RETURN LOSS: -30 dB UP TO 1 GHz
TYPICAL INSERTION LOSS: ≤ -0.18 dB UP TO 1 GHz TYPICAL RFI SHIELDING: -95 dB TYPICAL (60% BONDED FOIL CABLE)
MECHANICAL PROPERTIES
CABLE RETENTION : 40 LBS. MIN. COMPLIES TO SCTE IPS-SP-404
CABLE INSERTION FORCE: <20 LBS
ENVIRONMENTAL PROPERTIES
TEMPERATURE RATING: -40°F (-40°C) TO 140°F (60°C) |
