Leviton VSQIP IP/Quad Module for Structured Cabling Video Security
The Leviton IP/Quad Module enables the user to view the
Indoor and Outdoor Cameras either on one or more TV sets in
the home, or via the Internet from any location using an
Internet browser on a PC. The module includes password
protection to prevent unauthorized access. It mounts in the
Structured Media™ Center (SMC) and connects to the
composite video ports on the Camera Hub. It also connects via
data patch cord to either a Leviton Ethernet Switch or Internet
Gateway/Router in the SMC. The IP/Quad Module provides
several features including an alert function that will send an email
and/or trigger an external device if pixels change in one or
more camera views. The browser allows selection of either a
full-screen single camera view or multiple cameras up to four at
once in the same “quad” view. The single or multiple camera
views selected through the browser interface will appear on
both the TV screen and the browser interface.
Remote IP/Quad Internet access features DDNS (dynamic
domain name server) settings all within the configuration of
your IP/Quad providing simple user login. The DDNS service
will open a path through the IP/Quad to the Internet allowing
users to access the IP/Quad remotely—even if service providers
change their users’ IP address. For secure login, all remote Internet
access into the IP/Quad has user ID and password protection.
Leviton’s IP/Quad Module input ports connect into four video
output ports on the Leviton Camera Hub (VSHUB-000). Leviton
includes four BNC-to-RCA adapters, to enable installers to easily
connect the IP/Quad using RCA composite video cables to the
Camera Hub. The IP/Quad Video Output port can connect in
the same way to a Leviton Video Modulator, sequencer, or an
F-connector adapter directly over a spare RG6-Quad Shield cable
to the composite video input of a TV monitor.
Access to the IP/Quad Module’s network is done conveniently
through the WAN port. The unit also includes one-port router
capability; primarily for stand-alone commercial applications,
but in most cases the installer will disable the router function
and use the WAN
FEATURES AND BENEFITS
Mounts directly to the SMC with integral mounting bracket
Easy browser setup and control of all cameras, including
camera name, sensitivity, brightness, contrast, saturation,
hue, and single or multiple camera display mode
Includes DDNS (Dynamic Domain Name Server) function
to set virtual domain name
Real-time MPEG4 video encoding for the browser interface is
essentially full color, full motion, with no jerks and hops.
Compression engine supports not only CIF, but also single
camera full D1 resolution
QoS enabled video streaming per IEEE802.1pQ
Digital Time Code Embedded function in the video MPEG bit
stream, useful for finding exact time of video recording
Built-in hardware motion detection. Includes isolated digital
input and output connections for recorder start/stop or alert
functions on a per camera basis or all cameras
Includes four composite video input BNC connectors that
address standard commercial video surveillance camera
applications
Includes one composite video output BNC connector that
provides either a selectable single camera full-screen display,
or up to a four camera display in quad format
WAN port and convenience LAN port are 10/100 Base-TX
Includes five composite BNC-to-RCA composite video adapters
for adapting the BNC inputs and outputs to standard RCA
composite video cables shipped with the Leviton Camera Hub
and Video Modulator
Uses 12 VDC power from a provided plug-in AC/DC power
supply with special connector assembly. The installer may
power the unit with other Leviton SMC 12 VDC power supplies
using the provided special connector
Manufacturer has discontinued this item.
The following Home Automation Inc. item is offered as an exact substitute: Home Automation Inc. Web Camera Server
Wiring your home or office? Need input from friends & colleagues? Go social by clicking on your favorite social networking tool below.
